Liquid level sensor PS-010-010
504.07zł Tax excluded
Hydrostatic liquid level sensor PS-10-010
Submersible water pressure sensor. The pressure exerted by the water on the sensor is transmitted as a voltage signal (0 ~ 10 V). The hydrostatic pressure is directly proportional to the submersion. The sensor is designed for operation in water. The pressure level sensor is usually mounted in a vertical position (e.g., in a well), hanging on a cable. Where the sensor may be exposed to movement during measurement, the position of the sensor must be secured to prevent errors. This can be done with a tube or weight placed on the probe.
|Output signal||0 ~ 10 V|
|Power supply||12 ~ 24 VDC|
|Pomair range||0 ~ 10m|
|Working environment temperature||-10 ~ +85 °C|
|Degree of protection||IP68|
|Construction material||Stainless steel SUS304, rubber cable|
Dedicated meters for sensors are MG14 meter/regulator with four alarm relays and large display, and SD8V panel meter/regulator with two alarm outputs from Termipol. Thanks to the combination of the measurement result display devices and the sensor, it is possible to continuously control the level with a single sensor. The sensor can be used in water, for example, in a well.
Example of application with pressure sensor.
Set the input signal type Sn = 12 (0~10 V) → see instructions para. 3.
Set the minimum display value for the minimum value of the PUL input signal (we will set the display value for 0 V e.g. 0).
Set the maximum display value for the maximum value of the PUH input signal (we will set the display value for 10 V e.g. 500).
Reading and monitoring the water level in the tank using MG14 Panel Meter and PS series hydrostatic sensor.
- Measurement range
- 0 ~ 10m
- Operating temperature
- -10 ~ +85 °C
- Degree of protection
- Długość przewodów
- Materiał wykonania
- Stal nierdzewna SUS304, przewód gumowy
- Output signal
- 0-10 V
- Measurement medium
- Power supply
- 12 - 24 VDC
Add a review
Add a review