Liquid level sensor PS-05-420
390.24zł Tax excluded
Hydrostatic liquid level sensor PS-05-420
Submersible water pressure sensor. The pressure exerted by water on the sensor is transmitted as a current signal (4 ~ 20 mA). The hydrostatic pressure is directly proportional to the submersion. The sensor is designed for operation in water. The pressure level sensor is usually mounted in a vertical position (e.g., in a well), hanging on a cable. Where the sensor may be exposed to movement during measurement, the position of the sensor must be secured to prevent errors. This can be done with a tube or weight placed on the probe.
|Output signal||4 - 20 mA|
|Measuring range||0 ~ 5m|
|Working environment temperature||-10 ~ +85 °C|
|Construction material||Stainless steel SUS304, rubber cable|
Dedicated meters for sensors are MG14 meter/regulator with four alarm relays and large display, and SD8V panel meter/regulator with two alarm outputs from Termipol. Thanks to the combination of the measurement result display devices and the sensor, it is possible to continuously control the level with a single sensor. The sensor can be used in water, for example, in a well.
Example of application with pressure sensor and MG14 meter.
Set the input signal type Sn = 15 (4~20 mA) → see instructions para. 3.
Set the minimum display value for the minimum value of the PUL input signal (we will set the display value for 0 V, e.g. 0).
Set the maximum display value for the maximum value of the PUH input signal (we will set the display value for 10 V e.g. 200).
Reading and monitoring the water level in the tank using the MG14 Panel Meter and the PS-05-010 hydrostatic sensor.
Example of application with pressure sensor and SD8V meter.
Set the input signal type 1nP = 4_20 (4~20 mA) → see instructions para. 1.
Setting the minimum display value for the minimum value of the input signal FL = 0 (we will set the display value for 4 mA, for example, 0).
Setting the maximum display value for the maximum input signal value FH = 3000 (we will set the display value for 20 mA e.g. 3000).
- Measurement range
- 0 ~ 5m
- Operating temperature
- -10 ~ +85 °C
- Degree of protection
- Długość przewodów
- Materiał wykonania
- Stal nierdzewna SUS304, przewód gumowy
- Output signal
- 4-20 mA
- Measurement medium
- Power supply
- 12 - 24 VDC
Add a review
Add a review