Click for more products. ()
No produts were found.
0 Viewed
Click for more products. ()
No produts were found.

Liquid level sensor PS-C-02-010 designed for operation in acids

Reference:
CZPC-PS-C-02-010

Liquid level sensor PS-C-02-010 designed for operation in acids

817.00zł (price includes VAT)

664.23zł Tax excluded

Product details
Hydrostatic liquid level sensor, designed for acids (hydrochloric acid, sulfuric acid, hydrofluoric acid, sodium hydroxide, hydrogen peroxide and other highly corrosive liquids, chemical and galvanic wastewater). Range 0~2m. Made of tetrafluoro. See details
Materiał wykonania:
Stal nierdzewna SS 316L

Availability: In Stock

Related products
230.00zł

186.99zł Tax excluded

In Stock

Precise regulator - panel meter. Used as an indicator and regulator. Works with sensors having voltage, current or resistance outputs. Dedicated as a liquid level regulator or in other industrial applications.
341.00zł

277.24zł Tax excluded

There are not enough products in stock

The MG14 meter allows signal conversion to values needed in production, e.g. height, length (mm, cm), pressure, voltage, load. Built-in four relay alarm outputs ALL (b.low), AL (low), AH (high), AHH (b.high).
878.99zł

714.63zł Tax excluded

There are not enough products in stock

A kit for measuring the speed of a workpiece on a production belt. The kit includes a TA8 tachometer, a 30 imp/rev incremental encoder, an adjustable arm for the encoder, and a rubber-coated measuring wheel.
Description

Hydrostatic liquid level sensor PS-C-02-010

Submersible liquid pressure sensor. The pressure exerted by water on the sensor is transmitted as a voltage signal (0 ~ 10 V). The hydrostatic pressure is directly proportional to the submersion. The sensor is designed for operation in acids (hydrochloric acid, sulfuric acid, hydrofluoric acid, sodium hydroxide, hydrogen peroxide and other highly corrosive liquids, chemical and galvanic wastewater). The sensor capillary is made of F4 tetrafluoro. The signal of the measured pressure of the liquid is transmitted through a tube to the sensor, which is located in an external, airtight housing.

Hydrostatyczny czujnik poziomu cieczy PS-C-02-010
pic. submersible, pressure liquid level sensor PS-C-02-010.

Technical data

Name Description
Output signal 0 ~ 10 V
Power supply 24V
Measuring range 0 ~ 2m
Working environment temperature -40 ~ +150°C
Degree of protection IP68
Construction material F4 tetrafluoro
Capillary length 200cm


Dimensions

rys. Czujnik ciśnieniowy poziomu cieczy PS wymiary i  oznaczenia przewodów.
Fig. PS liquid level pressure sensor dimensions and wire markings.

Application

Dedicated meters for sensors are MG14 meter/regulator with four alarm relays and large display, and SD8V panel meter/regulator with two alarm outputs from Termipol. Thanks to the combination of the measurement result display devices and the sensor, it is possible to continuously control the level with a single sensor. The sensor can be used in water, for example, in a well.

Example of application with pressure sensor and MG14 meter.

Step 1

Set the input signal type Sn = 12 (0~10 V) → see instructions para. 3.

Step 2

Set the minimum display value for the minimum value of the PUL input signal (we will set the display value for 0 V, e.g. 0).

Set the maximum display value for the maximum value of the PUH input signal (we will set the display value for 10 V e.g. 200).

Skalowanie sygnału wejściowego

Fig. Input signal scaling for MG14 meter.

przykład mg14 + ps.png


Fig

. Connection diagram with PS fuel level sensor

animacja_miernik_poziomu_paliwa_mg14.gif

Reading and monitoring of fuel level in the tank using MG14 panel meter and PS-B-02-010 hydrostatic sensor.

Example of application with pressure sensor and SD8V meter.

Step 1

Set the input signal type 1nP = 0_10 (0~10 V) → see instructions para. 1.

Step 2

Set the minimum display value for the minimum input signal value FL = 0 (we will set the display value for 0 V e.g. 0).
Set the maximum display value for the maximum input signal value FH = 3000 (we will set the display value for 10 V e.g. 3000).

Skalowanie sygnału wejściowego dla miernika SD8V

Fig. Input signal scaling for SD8V meter
Data sheet
CZPC-PS-C-02-010
    Power supply:
    12 - 24 VDC
Pozostałe
    Mounting:
    No
    Operating temperature:
    0 ~ +400 °C
    Degree of protection:
    IP68
    Długość przewodów:
    300cm
    Materiał wykonania:
    Stal nierdzewna SS 316L
    Output signal:
    0-10 V
    Measurement medium:
    Benzyna, Olej napędowy, woda
Shipping
Reviews

Add a review

Add a review

  • Fit:
  • Quality:
Describe this product using simple and short words.
Upload images:
Drop images here or click to upload.
From the same category

Menu

Homepage

Menu