1/4 inch thread assembly. Range: 0.25-3 L/min ± 3%.
The product is shipped within 24 hours.
We complete the order within 24 hours.
The product is covered by a one-year warranty.
You can return the product within 14 days.
Power supply: | 5-18 VDC |
Output: | NO, wyjście tranzystorowe OC (10mA) min. 4,7 VDC (napięcie wejściowe 5 VDC) |
Material of execution: | Polypropylene |
Assembly: | Na kołnierz 9mm |
Minimum flow: | 0,25 L/min |
Max. Flow: | 3 L/min |
Wire lengh: | 30 cm |
Work pressure: | ≤ 0,8 MPa - (8 bar) |
Working Conditions: | 0 ~ 80°C |
Volume Converter: | 7055 imp/L ± 10% |
The flow sensor is designed to read the flow of water or other liquid with a flow rate of 0.25 to 3 L per minute. High sensitivity allows for the detection of even small liquid flows. The sensor sends a corresponding pulse signal. Made of a polymeric body, a water rotor and a Hall sensor. When water passes through the rotor, the rotor shaft moves. Its speed changes with different flow rates. The Hall sensor sends a corresponding pulse signal. It can be used for heaters, automatic water dispensers mounted on a 1/4 inch thread.
When water flows through the flowmeter body, it moves the impeller shaft - the sensor generates the appropriate X pulse signal (specified in the technical data). The number of pulses is proportional to the water flow rate. Thanks to the meters, pulses can be converted into user-friendly values such as milliliters, liters, liters / min.
This set allows for the measurement of liquid volume. Example: filling tanks with 1.5 l of liquid each tank.
This set allows both the measurement of the volume of the liquid and the number of doses. Example: filling a series of 10 tanks with 1.5 l of liquid each tank. After the series of 10 pcs. light notification.