Electronic flow meter for water, fuel (gasoline, diesel) etc. Easy to use, powered by 2x AAA 1.5V batteries.
The product is shipped within 24 hours.
We complete the order within 24 hours.
The product is covered by a one-year warranty.
You can return the product within 14 days.
Power supply: | 2x bateria AAA 1.5V |
Display: | Digital LCD Display |
Accuracy of measurement: | +/- 1% |
Material of execution: | Aluminium, Synthetic material |
Assembly: | Internal thread 1'' Inch |
Minimum flow: | 15 L/min |
Max. Flow: | 120 L/min |
Degree of Protection: | IP 65 |
Work pressure: | 20 bar |
Working Conditions: | -10 ~ 60 °C |
This electronic liquid flow meter is designed to read the amount and speed of water, fuel (gasoline, diesel) etc. flow with an efficiency of 15 to 120 L per minute. Made of an aluminum body, water turbine and built-in sensor with display. When the liquid passes through the turbine, the turbine shaft moves. Its speed changes with the speed of the flow. The sensor detects the appropriate pulse signal and indicates the value on the display. The whole is powered by two AAA 1.5V batteries (not included). Installation - thread with a diameter of 1 inch.
CALIBRATION:
1. Hold down the CAL key for 3 seconds. When the first digit starts flashing, set the value converter
again by pressing the CAL key. Click the RESET key to move to the next digits one by one.
2. Hold the CAL key for 3 seconds, click the RESET key 4 times to go to the single-digit setting -.
abbreviation will start flashing on the right side. Click the CAL key to change the unit of measurement.
LTR - liters | GAL - gallons | PT - pints | QT - quarts.
3. To exit the calibration mode wait 5 seconds. The selected values will be saved.
ADJUSTING THE COUNTED VALUES
For proper measurement it is necessary to adjust the value converter to the measured liquid flow rate
RESET SETTINGS
To reset the settings hold the RESET key for 5 seconds.
BATTERY
The flow meter is powered by 2x AAA 1.5V batteries (not included).
To insert the batteries inside the device, unscrew the 4 screws from the front panel of the device. Unscrewing
screws to place/replace the batteries will not void the warranty.
DIRECTION OF FLUID FLOW
The direction of liquid flow is marked on the device with an arrow (photo above).