3/4 inch thread assembly. Range: 2-60 L/min ± 3%.
The product is shipped within 24 hours.
We complete the order within 24 hours.
The product is covered by a one-year warranty.
You can return the product within 14 days.
Power supply: | 5-18 VDC |
Output: | NO, wyjście tranzystorowe OC (10mA) min. 4,7 VDC (napięcie wejściowe 5 VDC) |
Material of execution: | Polypropylene |
Assembly: | External Thread 3/4'' Inch |
Minimum flow: | 2 L/min |
Max. Flow: | 60 L/min |
Wire lengh: | 30 cm |
Work pressure: | ≤ 1,75 MPa - (17,5 bar) |
Working Conditions: | 0 ~ 80°C |
Volume Converter: | 419 imp/L ± 10% |
A liquid flow sensor designed to read water or other liquid flow with a capacity of 2 to 60 L per minute. High sensitivity allows for the detection of even small liquid flows. The sensor sends an appropriate pulse signal. Made of a polymeric body, a water rotor and a Hall sensor. When water passes through the rotor, the rotor shaft moves. Its speed changes with different flow rates. The Hall sensor sends an appropriate pulse signal. It can be used for heaters, automatic water dispensers mounted on a 3/4 inch threaded pipe.
When water flows through the flowmeter body, it moves the impeller shaft - the sensor generates the appropriate X pulse signal (specified in the technical data). The number of pulses is proportional to the water flow rate. Thanks to the meters, pulses can be converted into user-friendly values such as milliliters, liters, liters / min.
This set allows for the measurement of liquid volume. Example: filling tanks with 1.5 l of liquid each tank.
This set allows both the measurement of the volume of the liquid and the number of doses. Example: filling a series of 10 tanks with 1.5 l of liquid each tank. After the series of 10 pcs. light notification.