Temperature regulator utilizing PT100 sensor. Control output relay R1 16A + alarm output R2 3A. Simple and convenient to use.
The product is shipped within 24 hours.
We complete the order within 24 hours.
The product is covered by a one-year warranty.
You can return the product within 14 days.
Power supply: | 230 VAC +/-10% |
Regulation: | On/Off |
Hysteresis: | 1~15° |
Output: | Relay |
Max. Load: | 16 A |
Range: | 0~400°C |
Display: | Digital LCD Display |
Sensor Service: | PT100 |
Working Mode: | Heating |
Emergency Exit: | R2 przekaźnikowe (5A) |
Dimension: | 78x39 mm |
Assembly: | In the table |
Resolution: | 1°C |
Degree of Protection: | IP 65 |
Working Conditions: | -10 ~ 45 °C, 5 ~ 85% Rh |
This professional temperature regulator is designed to work with a PT100 sensor. The regulation is based on the on-off method with adjustable hysteresis. The regulator has a temperature measurement channel (PT100), an R1 control output (16A) and an alarm output R2 (3A NO/NC). It is used in heating devices and installations. The controller has a size of 78x39mm and is designed for mounting in a panel in a hole with dimensions of 70x28mm using mounting brackets. The maximum panel thickness must not exceed 15mm.
The controller maintains the set temperature with the specified hysteresis through the relay output. The temperature measurement is done through the chamber temperature sensor. The regulator can work in heating mode: |
Example:
Set temperature (SET): 80.0°C,
hysteresis (h): 1.0°C
In HEAT mode (heating) the controller starts heating when the sensor temperature is lower than the set temperature - hysteresis [SET-h], and stops heating when the chamber sensor temperature is higher than the set temperature + hysteresis [SET+h].
The controller is used in plastic processing and wherever it is necessary to reliably and economically regulate the temperature.